Lexus suspension bushings are usually small, round discs that provide cushioning between the suspension and other parts of the car. They can wear out with use and need to be replaced every so often. You'll need a set of tools to install them, but aside from this requirement you should have no problem replacing these bushings on your Lexus.
If you're looking to improve the handling and performance of your Lexus, one of the best ways to do so is by upgrading the suspension bushings. You can also search online to buy lexus suspension bushings according to your requirements.
In this article, it will show you how to install Lexus suspension bushings, so you can get the most out of your vehicle.
1. First, you'll need to raise your Lexus off the ground and support it securely with jack stands. Never work on your vehicle while it's supported by just a jack.
2. Once your vehicle is raised and supported, you can begin removing the old suspension bushings. To do this, remove the bolts that secure the bushing in place using a socket or wrench. You may need a breaker bar to loosen stubborn bolts. Once the bolts are removed, the bushing should be able to be pried out with a pry bar or screw driver.
3. Install the new bushing into the mount, and then secure it in place with the bolts you removed earlier. Torque the bolts to the specified value in your service manual.
Repeat these steps for all of the suspension bushings on your vehicle. Once you're finished, lower your vehicle back down to the ground and take it for a test drive to see how the new bushings improve the ride and handling.